Your question: How many gears does a e4od transmission have?

An unusual feature of the E4OD is the shifter pattern, which is P-R-N-OD-2-1. In the (D) range, the transmission shifts through all four gears.

What is the difference between E4OD and 4R100?

The 4R100 was introduced as the replacement for the E4OD and was internally stronger for use in the Powerstroke Diesel trucks. While almost identical on the exterior, not all parts are interchangeable between these two units, so care must be exercised to insure compatibility.

How much HP can a stock E4OD handle?

As long as the 7.3L Power Stroke goes unmodified, the factory E4OD will generally live a while. Although, it can still be killed at the stock 210 hp and 425 lb-ft level with heavy abuse.

How long does a E4OD transmission last?

when the fluid level is low it will hesitate to go into gear cold, and the torque converter will hang locked up when stopping. as for life span, i have seen unmaintained and abused E4OD’s blow at 30k miles, and very well maintained transmissions last over 600,000 miles.

IMPORTANT:  Can you make your car seats heated?

What year did Ford stop using the E4OD transmission?

In 1998, the 4R100 replaced the E4OD.

What controls shifting on a E4OD?

The newly introduced electronic shift controls include the use of a standalone transmission control module. Shifts are done electronically with solenoids and fluid pressure control systems which engage the optimum gear based on the input from a transmission controller.

Can I replace my E4OD with a 4R100?

All E4OD pumps are completely interchangeable. In 1998, Ford intro- duced the 4R100; one of the four pumps made for this unit is inter- changeable with the E4OD pump — as a complete assembly.

How much transmission fluid does a e40d hold?

Ford E4OD Transmission Specs

Transmission: Ford E4OD
ATF Type/Spec: Ford MERCON V automatic transmission fluid
Transmission Filter P/N: 2WD applications Motorcraft FT-113
4WD applications Motorcraft FT-114
Fluid Capacity: ~ 17 – 18 quarts

How do you get 500hp out of a 7.3 Powerstroke?

Aside from adding a chip, a considerable up-sizing of the fuel injectors is mandatory to get any kind of measurable horsepower out of a 7.3L Power Stroke. For us, the only option is to upgrade to a set of hybrid injectors, and specifically the 238cc version for 500hp goals.

How much horsepower can you get out of a 7.3 diesel?

The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb. ft. of torque.

Is the E40D a good transmission?

As we mentioned earlier, heat is one of the biggest killers of any automatic transmission. The truck’s new TCI MaXimizer E40D transmission (along with its high-torque converter) performs flawlessly, with smooth and firm upshifts and distinct downshifting when coming to a stop.

IMPORTANT:  How long does it take to repair a front bumper?

How do I know if I have a E4OD transmission?

To determine which is used in your vehicle, follow these guidelines: If the shifter has a P-R-N-OD-D-1 pattern, the transmission must be an AOD (applicable to 1980-1993 vehicles). If a 1989-1993 truck has an Overdrive Cancel Switch and a P-R-N-OD-2-1 shifter pattern, then it is equipped with an E4OD transmission.

How do I know what transmission is in my truck?

Another way is to crawl under the vehicle and look for part numbers. Using a good flashlight, look for part numbers stamped into the transmission pan or the transmission itself. Your local auto part store or dealer will be able to cross-reference the numbers to determine the kind of transmission the part belongs to.